16cm Non-Wastegated Turbine Housing (Short Outlet) - TH-05
16cm Non-Wastegated Turbine Housing with Short Outlet
16cm Non-Wastegated Turbine Housing with short exhaust outlet.
Genuine, Holset (Cummins Turbo Technologies) 16cm2 short outlet, Non-Wastegated Turbine housing for Holset H1C, WH1C, HX35 & HX35W Turbochargers.
This Turbine Housing is a direct "drop in" upgrade for all 1988-1993 Dodge diesel truck turbochargers and exhaust systems.
It is also a direct turbo fit for all 1994-1998 Dodge diesel truck turbochargers, but requires moving the exhaust foreward 1.25" on these year trucks.
It will also direct fit the 1999-2002 manual transmission, and 1999 auto transmission Dodge diesel truck turbochargers, but these applications these applications require an exhaust outlet clamp and 45 degree outlet piece from a 1994-1998 truck and moving the exhaust foreward 1.25".
(A 14cm long outlet housing, is a better choice on 1994-2002 trucks)
Note; This will not fit 2000-2002 auto transmission trucks with the stock HY35 turbocharger, or any 3rd generation trucks.
Recommended Best for; 1988-1993 1st Gereration trucks for better spool up, Power, and heat reduction on most trucks (heat reduction dependant on fuel delivery, horsepower, and elevation).
These trucks came stock with a 18cm, except for the first 70,000 air-to-air intercooled trucks built in the last half of 1991 & first of 1992, which were built with a 21cm housing.
With this housing, we recommend you add the;
GDS H1/HX Gasket Set
For Turbocharger mounting on 1988-2007 5.9L Dodge / Cummins applications.
I want more!
11/29/2014 10:50 PM
I have a 92 w250 with nv4500 mild pump mods and 60mm upgrade and was far greater than the stock 21cm housing but still has a bit of lag. I am going with the 12cm because I found one for cheap.